Press and hold Where Am I: Lists what is around (landmarks or points of interest) in your
surroundings (range of 200 meters in pedestrian mode and 500 meters in motorized mode).
Double press Where Am I: Activates the Key Describer Mode.
The Back button
Used to move to a previous level in a menu. While following a route, it allows you to deactivate the
route, letting you explore your environment without being guided.
Press and hold the Back button: takes you back to Explore mode.
The Go To button is used to validate a text entry, or to activate guidance to a landmark. It provides
access to the list of landmarks that are set as possible destinations.
Press and hold Go To: It is used to select a pre-recorded route.
The Confirm button is used to launch actions and confirm the current selection.
The Left arrow and Right arrow are used to browse through items in a list.
Press and hold the Right arrow to lock you into open area and prevent the StellarTrek from
automatically placing you on a nearby street. Press and hold the Right arrow again to leave open
area lock. Now the StellarTrek will automatically recognize whether you are in an open area or on
a street. When browsing a route, press and hold the Right arrow to go to Indoor preview mode.
Press and hold the Left arrow to open the travel mode menu, which allows you to choose between
pedestrian, motorized or automatic. When following a route, press and hold the left arrow to
reroute..
The Up arrow is used to enter map browsing mode. The Up arrow can also be pressed to move
up in a contextual menu, displaying available options for an item.
Press and hold the Up arrow to enter Detection Mode (see section 4 for more details).
The Down arrow is used to provide information on the state of the system. Use the Left and Right
arrows to access the 2 levels of information. The Down arrow can also be pressed to move down
in a contextual menu, displaying available options for an item.
Double press the Down arrow: Describes the current system status.
Press and hold the Down arrow: This accesses System settings. Use the Left and Right arrows
to move through hierarchical menu, then use Confirm to enter into the selected option.
Return to basic navigation
No matter what actions have been undertaken, you can always return to basic exploration of your
surroundings by pressing and holding the Back button.
Inaction from the user
Whenever you are asked to make a selection, you must confirm your selection. If an action is not
performed within 45 seconds, the StellarTrek will announce the current item in the menu.
To Next Page
Loading...