Creating Sample Plans 17
About Sample Plans
Sample plans allow users to organize a group of related test points. For example, all test points
associated with a blending line in a facility can be grouped under a sample plan titled “Blending
Line.”
A single test point can be assigned to multiple sample plans. For instance, test point #4 can be
assigned to the “Blending Line” and the “Processing Line.”
Creating a Sample Plan
• Select “Test Point Setup” from software’s top menu.
• Select “New Sample Plan” from left-hand column.
• A pop-up box will appear and instruct user to enter a sample plan name.
• Enter the name of the new sample plan and press “Save”.
• All sample plans will be listed on the left-hand side of the screen under “Select to View”
in alphabetical order.
Assigning Test Points to a Sample Plan
• Select desired parameter from which to assign test points (ATP, pH, etc.).
• Highlight desired test point.
• Holding down the right mouse button, drag and drop test point into desired sample plan
on the left-hand side of the screen.
Viewing Assigned Test Points in a Sample Plan
• Select the sample plan name and all associated test points will be listed.
• The assigned sample plan will now also appear in the test point’s drop-down menu
selection.
• Select “All Test Points” to return to list of test points.
Click drop-down arrow to
see full list of sample plan
assignments for test point
in alphabetical order
36
To Next Page
Loading...