Humeau LIGHTNING MVP ICON - Fastening the Icon Shoulder Strap

Fastening the ICON Shoulder Strap
It is important to ensure the shoulder strap for the MVP ICON is properly and securely connected
to the instrument before use. Follow the steps below to correctly secure the straps to the
instrument.
1. Loop one loose end of the strap around the backside of the pins on the back of the
instrument.
2. Thread the loose end up through the top of the buckle and back down through the bottom
end of the buckle.
3. To ensure the strap is tightly fastened, loop the loose end of the strap back through the top
side of the buckle and pull until the strap end is taut.
For additional assistance, please contact BioControl Technical Support at 800.245.0113.
70