Materials and Equipment
The LIGHTNING MVP ICON is a multi-parameter HACCP monitoring system. The MVP ICON
utilizes accessory probes and sampling devices to measure and record key HACCP parameters
including ATP, pH, temperature, conductivity, and concentration. The included MVP ICON
Dashboard software allows for easy trending and analysis of results. The software’s dashboard
provides an overview of key control metrics at a glance.
Included in the Box
• MVP ICON instrument
• MVP ICON Dashboard software CD
• USB cable
• AC adapter (US)
• International adapters
• Shoulder strap
ATP Supplies (Purchased Separately)
• LIGHTNING MVP ICON Surface Sampling Device - for detection of ATP on surfaces
• LIGHTNING MVP ICON Liquid Sampling Device - for detection of ATP in Clean in Place
(CIP) rinse water and other liquid samples
• LIGHTNING MVP ICON ATP Calibrator Set – for calibration and verification of the ICON
instrument for accurate detection of ATP
• LIGHTNING MVP ICON ATP Positive Control – a lyophilized, stable preparation of a known
concentration of ATP for routine verification of the ICON system’s performance
Conductivity and Concentration Supplies
• ICON Conductivity Probe - for measuring conductivity of liquids and determining
chemical concentration of sanitizers and cleaners
• Conductivity Standard (500 µs) – for calibration of ICON Conductivity Probe
pH Supplies
• ICON pH Probe – for measuring pH and temperature of solutions
• pH Calibration Standards (pH 4.00, pH 7.00, and pH 10.00) – for calibration of ICON pH
Probe
Temperature Supplies
• ICON Temperature Probe – for measuring product temperatures
Charging the MVP ICON
To charge the MVP ICON battery, use the provided adaptor and plug into a wall outlet. The
battery will take approximately 2 – 4 hours to fully charge to 100%.
Charging Best Practices
• Utilize the ICON until the instrument displays Code 11 – Low Battery, then charge to
100% via the wall outlet.
• Do not leave the ICON plugged into the wall outlet overnight. Doing so will overcharge
the battery and shorten its lifespan.
NOTE: The MVP ICON battery will not charge from a computer via a USB connection. This will
utilize more battery power, potentially draining the charge.
2
To Next Page
Loading...