Humminbird ONIX User Manual

134
AIS
AIS Filter Settings
You can also control how many AIS targets are shown on the view by adjusting the filter settings.
Turn on/off Range Filter
If Range Filter is turned on, targets are displayed from your vessel to the distance you set. Targets outside of the range will not be
displayed.
If Range Filter is turned off, targets will be displayed within the full range of the AIS equipment’s transmission capabilities.
1. Press the HOME key.
2. Select the Targets tool.
3. Select Settings > Range Filter. Tap the on/off button, or press the ENTER key, to turn it on/off.
4. Press and hold the slider, or turn the Rotary dial, to adjust the setting.
Turn on/off Class B Filter
If Class B Filter is turned on, Class B targets will not be shown. If Class B filter is turned off, all available AIS targets will be shown.
1. Press the HOME key.
2. Select the Targets tool.
3. Select Settings > Class B Filter. Tap the on/off button, or press the ENTER key, to turn it on/off.

Humminbird ONIX Specifications

General

Networking	Ethernet
Waterproof Rating	IPX7
Waypoints	3000
Power Output	500W (RMS)
Frequency	50/83/200 kHz
GPS Receiver	Internal