139
AIS
D
isplay the AIS Data for a Selected Target (Targets Tool)
1. From the Home screen, select the Targets tool.
2. Under Lists, select AIS.
3. Tap a target or use the Joystick to select it. Review the summary information in the dialog box (see the illustration AIS Target
Data Received).
Display the AIS Data for a Selected Target (Chart View or Radar View)
1. With a Chart View or Radar View displayed on-screen, tap a target to select it. Tap the target name.
OR
Use the Joystick to move the cursor to a target. Press the ENTER key.
2. The dialog box will display the target class, type, SOG (Speed over Ground), COG (Course over Ground), CPA (Closest Point of
Approach), and TCPA (Time to Closest Point of Approach).
To see all information for the selected target, select Full Info.
Display the COG Vector for a Selected Target
The COG Vector displays a line extending from the target that indicates the last known ship speed. COG indicates Course over Ground.
1. Select a target from the Targets tool, Radar View, or Chart View.
2. Tap the target name, or press the ENTER key.
3. Select COG Vector.
4. Tap the check box, or press the Joystick, to add a check mark to COG Vector.
select to display
all targets
add check mark
to display the
COG vector
target safety
information
target
information
To Next Page
Loading...
Need help?
General
