Humminbird ONIX User Manual

180
Images Tool
C
reate a Waypoint with Screen Snapshot
If you turn on Create Waypoint in the Images tool, each time a screen
snapshot is taken, the waypoint position will be saved.
1. Press the HOME key.
2. Select the Images tool.
3. Select Settings.
4. Select Create Waypoint. Tap the on/off button, or press the
ENTER key, to turn it on.
When a screen snapshot is taken with Create Waypoint turned
on, the screen snapshot will display a waypoint icon in the
Images tool preview.
screen snapshot saved with
Create Waypoint turned on

Humminbird ONIX Specifications

General

Networking	Ethernet
Waterproof Rating	IPX7
Waypoints	3000
Power Output	500W (RMS)
Frequency	50/83/200 kHz
GPS Receiver	Internal