Humminbird ONIX User Manual

183
Images Tool
Edit Screen Snapshots
The Images Options menu allows you to edit the name and review the file information for the selected screen snapshot. You can
also copy screen snapshots to another save location or delete them.
Change a Screen Snapshot Name
1. From the Images tool, press and hold a screen snapshot.
OR
Use the Joystick to select a screen snapshot. Press the MENU key.
2. Select Name. Use the on-screen keyboard to enter a name.
3. Select Save.
Review Screen Snapshot Information
When you save a screen snapshot, the date and time the screen snapshot was taken is saved. If Create Waypoint is turned on, the
position and waypoint name are also saved with the screen snapshot. Use these instructions to review the saved information.
1. From the Images tool, press and hold a screen snapshot.
OR
Use the Joystick to select a screen snapshot. Press the MENU key.
2. Select Info.
Copy a Screen Snapshot
1. From the Images tool, press and hold a screen snapshot.
OR
Use the Joystick to select a screen snapshot. Press the MENU key.
2. Select Copy.
To copy all screen snapshots, select Copy All.
3. Select a location to save the copy.
Delete a Screen Snapshot
1. From the Images tool, press and hold a screen snapshot.
OR
Use the Joystick to select a screen snapshot. Press the MENU key.
2. Select Delete.
To delete all screen snapshots, select Delete All.

Humminbird ONIX Specifications

General

Networking	Ethernet
Waterproof Rating	IPX7
Waypoints	3000
Power Output	500W (RMS)
Frequency	50/83/200 kHz
GPS Receiver	Internal