193
Wireless Setup
A
utomatically Connect to a Network
Use Auto-Connect to specifiy a preferred network. When Auto-Connect is selected with a check mark, the control head will connect
to the selected network first when Wi-Fi is turned on.
1. Turn on Wi-Fi.
2. Tap the network name, or use the Joystick to select it.
3. Press the MENU key once.
4. Select Auto-Connect. Tap the check box, or press the ENTER key, to add the check mark.
Connect to a Hidden Wi-Fi Network
The Find Network menu allows you to manually enter a network name and password, which can be used if a network is not found
when you turn on Wi-Fi. After you’ve connected to the network for the first time, it will be included in the network list when Wi-Fi is
turned on.
NOTE: The network must be in the antenna reception range to be detected by the control head.
1. Turn on Wi-Fi.
2. Under Wi-Fi Networks, select Find Network.
3. Use the on-screen keyboard to enter the network name.
4. Use the on-screen keyboard to enter the password.
Disconnect from a Network
There are two ways to disconnect from a network. You can turn off Wi-Fi, or you can continue to use Wi-Fi but disconnect from a
selected network.
Turn off Wi-Fi
1. Select Wi-Fi.
2. Tap the on/off button, or press the ENTER key, to turn it off.
Disconnect from a Selected Network
1. In the network list, tap the network name, or use the Joystick to select it.
2. Press the MENU key once.
3. Select Disconnect.
Remove Network Data
Use Remove Network to delete a known network. If you remove a network, the network name might display on the network list, but
the security information will be deleted.
1. In the network list, tap the network name, or use the Joystick to select it.
2. Press the MENU key once.
3. Select Remove Network.
To Next Page
Loading...
Need help?
General
