200
Radar Configuration
WARNING! Humminbird is not responsible for the loss of data files (waypoints, routes, tracks, groups, snapshots, recordings, etc.)
that may occur due to direct or indirect damage to the unit’s hardware or software. It is important to back up your control head’s
data files periodically. Data files should also be saved to your PC before restoring the unit’s defaults or updating the software.
See your Humminbird online account at humminbird.com for details.
Export Radar Installation Settings
1. Install a formatted SD card into the SD card slot.
2. Press the HOME key.
3. Select the Files tool.
4. Under Export, select Radar Installation.
5. Select a save location.
Import Radar Installation Settings
1. Install a formatted SD card into the SD card slot.
2. Press the HOME key.
3. Select the Files tool.
4. Under Import, select Radar Installation.
5. Select the radar installation file.
To Next Page
Loading...
Need help?
General
