Humminbird ONIX User Manual

40
Views
C
hange the Data Boxes
Use the following instructions to change the data boxes displayed in a data bar.
NOTE: A data bar must be displayed to access the menu options in this section. See Display a Data Bar.
1. View Options Menu: With a view displayed on-screen, press the PANE key once. In a multi-pane view, press the PANE key
repeatedly until the status bar turns yellow.
2. Press the MENU key.
3. Select Edit Data.
4. To edit the Standard data bar, select Standard Data. To edit the Navigation data bar, select Navigation Data.
Global (Optional): To apply the changes to all views using the data bar, turn on Global. To apply changes to the on-screen view
exclusively, turn off Global.
5. Use the Joystick to choose a data box. Press the Joystick to select it.
6. Select a data type from the menu.
7. Select a data box.
8. Close: Press the EXIT key. Press the PANE key.
Tap to Select Select Open
OR
Selecting a Data Box Selecting the Data Type Selecting the Data

Humminbird ONIX Specifications

General

Networking	Ethernet
Waterproof Rating	IPX7
Waypoints	3000
Power Output	500W (RMS)
Frequency	50/83/200 kHz
GPS Receiver	Internal