69
Chart Options
Select Map Data
When a Navionics chart or C-MAP by Jeppesen chart is installed and selected as the map source, you can set navaids, marine, and
land icons to hidden or visible. The Depth menu option allows you to see shading on the map based on the set depth.
NOTE: C-MAP by Jeppesen or Navionics must be selected as the map source to enable this feature. The menu options will change
with the selected map source.
1. With a Chart View displayed on-screen, tap Chart in the status bar, or press the MENU key once.
2. Select Chart Options.
3. Select Map Data.
4. Use the touch screen or the Joystick to select a menu and change the settings.
Chart View with Navaids and Icons Displayed (Navionics)
To Next Page
Loading...
Need help?
General
