Humminbird ONIX User Manual

84
Waypoints
Edit a Waypoint in the Chart View
1. Tap the waypoint icon to select it. Tap the Waypoint Name.
OR
Use the Joystick to move the cursor to a waypoint icon. Press the ENTER key.
2. Use the Waypoint Info menu to edit the waypoint name, icon, color, and more (see Manage your Navigation Data for more
information).
3. Close: Press the EXIT key.
Create a Depth Marker
To save depth information with a waypoint, mark the waypoint at the vessel position. If the waypoint is marked at the cursor position,
the depth information will not be available, but you can enter a depth manually. When Depth Marker is turned on, the Depth Marker
icon is displayed on the Chart View.
1. Tap Chart in the status bar. Select Mark > Waypoint.
OR
Press the MARK key twice.
2. Select the Waypoint icon on the Chart View.
3. Press the ENTER key.
4. Select Depth Marker. Tap the on/off button, or press the ENTER key, to turn it on.
To change a depth marker back to a waypoint icon, turn off Depth Marker.
Editing a Waypoint on the Chart View
waypoint
info menu
waypoint
name
waypoint
icon

Humminbird ONIX Specifications

General

Networking	Ethernet
Waterproof Rating	IPX7
Waypoints	3000
Power Output	500W (RMS)
Frequency	50/83/200 kHz
GPS Receiver	Internal