Humminbird ONIX User Manual

98
Tracks
Save the Current Track
Use the following instructions to save the current track and start a new track.
1. Tap a track start point or end point. Tap the Track Name.
OR
Use the Joystick to move the cursor to a track start point or end point. Press the ENTER key.
2. Select Save Track.
N
OTE: You can also start a new track from the Nav Data tool. See Manage your Navigation Data: Manage Tracks.
Clear the Current Track
Use the following instructions to clear the current track and start a new track at the current vessel position.
1. Tap a track start point or end point. Tap the Track Name.
OR
Use the Joystick to move the cursor to a track start point or end point. Press the ENTER key.
2. Select Clear Track.
Chart View with a Track Displayed
track info
menu
track name
track
end point
track
start point
selected
with cursor

Humminbird ONIX Specifications

General

Networking	Ethernet
Waterproof Rating	IPX7
Waypoints	3000
Power Output	500W (RMS)
Frequency	50/83/200 kHz
GPS Receiver	Internal