26
How long will the Flow-Clik keep my system off if an
overflow condition occurs?
The Flow-Clik Interface Box allows the user to customize
the Flow-Clik operation based upon the specific system.
The Flow-Clik Interface Box provides for 9 pre-set Interrupt
delay positions from 5 to 60 minutes that are set by the
user. There is also a manual re-start position that requires
the user to manually re-start the irrigation system at the
Interface Box if an overflow condition has shut the system
off.
How do I know my Flow-Clik is working?
The Flow-Clik Interface Box has a System Status Indicator
that provides information on the status of your Flow-Clik.
Reference page 4 of this manual.
Will I lose my controller settings if the Mini-Clik shuts
my system off due to rain?
No, the Flow-Clik switches off the solenoid valves of the
irrigation system when it senses an overflow condition This
prevents flow of water to the sprinklers without affecting
the operation of the timer. Once the Flow-Clik has reached
the end of the Interrupt Period programmed into the Inter-
face Box, the valves resume normal operation.
FREQUENTLY ASKED QUESTIONS ...............................................................
To Next Page
Loading...
