Hunter VSX User Manual

11
VSX OPERATING MANUAL
You may now press the OPTIONS, BACK, or
NEXT buttons to view more options, or you may
press EXIT to leave the Edit Settings mode.
Set Date: To set the Date, press ENTER at this
display. The display will then show:
Note: VSX dates are always shown in North
American format (month/day/year).
Type the number for the correct month (1-12), in
this case “3” for March, and press ENTER (you
can also use the BACK/NEXT buttons to move
around in the Date). The display will then show:
Type the number for today’s date (“8” in this
example), and press ENTER. The display will
show:
Type the correct year, and press ENTER. The
display will show:
Press ENTER to set the date. The display will
briefly show SAVED! and the date you have
set. After a moment, the display will revert to:
You may now press the OPTIONS, BACK, or
NEXT buttons to view more options, or you may
press EXIT to leave the Edit Settings mode.
Set Main % Scale: “% Scale” allows you to
reduce or increase all of the Run Times in the
controller by the selected percentage (from 1 to
250%, in 1% increments). This enables you to
quickly adjust the amount of irrigation for
weather or other conditions without changing
the basic programs. At 50%, each Run Time
will only run half as long, and at 150%, each
Run Time will run one-and-half times as long.
Note: In the Program Options, you can also
scale individual Programs separately. The
effects of % scaling are cumulative. See Set
Program % Scale on page 30.
To set the Main % Scale from the Edit FC
Settings mode, press ENTER at this display.
The display will then show:
Type the percentage you want with the number
buttons on the keypad, and press ENTER. The
display will briefly show “SAVED!” and the
new % Scale amount. After a moment, the
display will revert to:
You may now press the OPTIONS, BACK, or
NEXT buttons to view more options, or you may
press EXIT to leave the Edit Settings mode.
Note that, whenever the controller is scaled up
or down (to any value other than 100%), a “+”
or “-” sign will appear as a reminder in the
upper left corner of the status display (before
the Day and Time information).

Hunter VSX Specifications

General

Brand	Hunter
Model	VSX
Category	Controller
Language	English