Hunter VSX User Manual

15
VSX OPERATING MANUAL
number buttons on the keypad, and press
ENTER. The display will show:
Press ENTER to set the MR Runtime. The
display will briefly show SAVED! and the MR
Runtime you have set. After a moment, the
display will revert to:
You may now press the OPTIONS, BACK, or
NEXT buttons to view more options, or you may
press EXIT to leave the Edit Settings mode.
Set MR Pump?: MR = Maintenance Radio.
This determines whether the Pump output in
the Field Controller will be activated whenever
Maintenance Radio starts stations. If you are
using the Pump output to activate a Pump Start
Relay or a Master Valve, you can choose to
have that output come on whenever a Mainte-
nance Radio command starts a station.
To set MR Pump: Press ENTER at the “Set MR
Pump?” display. The display will then show:
The current selection will be capitalized (de-
fault is YES). The “no” selection will be in
lower case. Press the TOGGLE button to
switch between YES and NO. When it is
correct, press ENTER. The display will flash
“SAVED!” and your selection. After a moment,
the display will revert to:
You may now press the OPTIONS, BACK, or
NEXT buttons to view more options, or you may
press EXIT to leave the Edit Settings mode.
Set PINS: The VSX controller has 2 levels of
optional password protection:
The Supervisor level can perform all program-
ming functions.
The Operator level can perform basic functions
(START and STOP commands) which do not
affect the automatic programs and their options.
Each level of access can be protected by a
4-digit Personal Identification Number (PIN).
To set PINs: Press ENTER at the “Set PINs?”
display. The display will then show:
Type any 4 digits (there must be exactly four,
from 0001 to 9999) which you will be able to
remember, and press ENTER. The display will
show:
Type exactly the same PIN number again and
press ENTER. The display will show “SAVED!”.
If you fail to enter the same number the second
time, the display will show ERROR! You will
then need to reenter the PIN and enter the
confirmation a second time.
Once the PIN has been entered correctly, the
display will show:

Hunter VSX Specifications

General

Brand	Hunter
Model	VSX
Category	Controller
Language	English