HunterDouglas Sonnette - Attach the Universal Cord Tensioner (UCT)

INSTALLATION — CASSETTE
12
■
Remove the remaining paper backing from the dots.
■
Center the dust cover over the top of the shade, above the dots.
■
Press the dust cover down onto the dots.
Attach the Universal Cord Tensioner (UCT)
Before doing anything, you must first slide the cord
tensioner to the bottom of the beaded cordloop.
■
Insert a small screwdriver, punch, or awl through the
screw hole at the bottom of the cord tensioner.
■
While holding the cord tensioner, move screw hole
all the way down to the bottom of the cord tensioner
to release the safety mechanism.
■
Slide the cord tensioner down to the bottom of the
beaded cordloop.
■
Attach the cord tensioner according to the
instructions provided with Universal Cord Tensioner Kit.
WARNING: It is imperative that the cord tensioner be properly secured
to the wall or window frame to reduce children’s access to the cord
loop. Young children can strangle in cord loops. They can also wrap
cords around their necks and strangle.
CAUTION: The shade will not operate properly unless the cord tensioner is
secured. A cord tensioner installation kit has been included with your shade.
Follow the instructions in the kit to correctly secure the cord tensioner.
Dust Cover Installed
Bottom
Universal
Cord
Tensioner