HunterDouglas Sonnette - Operation; Operate the Shade; Troubleshooting

OPERATION
14
Operate the Shade
To Lower the Shade
■
Pull the front of the cord loop to lower
the shade.
■
Pull until the shade is at the desired height.
To Raise the Shade
■
Pull the back of the cord loop to raise
the shade.
■
Pull until the shade is at the desired height.
Troubleshooting
Problem
The shades raises or lowers unevenly.
Solution
Check that the installation brackets are level and aligned. Shim the brackets,
if necessary.
Roll up the shade until the bottom rail is fully raised.
Reinstall the shade.
Problem
The universal cord tensioner has climbed to the top of the shade.
Solution
Pull down on the spring to relieve tension and pull the universal cord tensioner
to the bottom of the cord loop. Properly mount the cord tensioner. See
Universal Cord Tensioner Installation Instructions in the kit included with your
shade.
Problem
The universal cord tensioner grabs onto the cord upon operation.
Solution
Check that the universal cord tensioner is mounted properly. Reinstall, if
necessary. See the Universal Cord Tensioner Installation Instructions that
came with your Cord TensionerKit.
Pull the
Back of
Cord Loop
to Raise
Pull the
Front of
Cord Loop
to Lower