HunterDouglas Sonnette - Required Tools and Fasteners

2
GETTING STARTED
Thank you for purchasing Hunter Douglas Sonnette
®
Cellular Roller Shades. With proper
installation, operation, and care, your new shades will provide years of beauty and
performance. Please thoroughly review this instruction booklet before beginning the
installation.
Tools and Fasteners Needed
■
#1 Flat blade and #2 Phillips screwdriver
■
Level (laser level is recommended)
■
Measuring tape and pencil
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■
#6 Hex Head Screws (Provided) — For Standard M Clutch, Designer Metal
Bracket and Cassette Shades. Two 1
1
⁄ 2 " screws are provided per installation bracket.
■
Longer #6 Hex Head Screws (Not Provided) — For Cassette Shades. If using
spacer blocks, use #6 screws long enough for a secure attachment.
■
Speed Nuts and Screws (Provided) — For Cassette Shades. Extension brackets
come with screws and speed nuts.
■
Drywall Anchors (Not Provided). Use drywall anchors when mounting into drywall.
CAUTION: For Standard/Designer Metal Bracket Shades, drywall anchors are not
recommended. Mount into wood/metal studs or into concrete with metal anchors.
#6 x 1
1
∕ 2 " Hex
Head Screw
(Provided)
#10 x 1
1
∕ 2 " Hex
Head Screw
(Provided)
Speed Nut
and Screw
(Provided with Each
Extension Bracket)
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)