HunterDouglas Sonnette - Attach the Magentic Hold-Down Brackets (Optional)

INSTALLATION — CASSETTE
13
Attach the Magnetic Hold-Down Brackets (Optional)
■
Lower the shade. See “Operate the Shade” on page 14.
■
Place the magnetic hold-down bracket onto the bottom rail just
inside the end cap, oriented as shown.
■
Mark the screw location using the mounting options shown below.
➤
The screw should be placed in the middle of the channel. This
will allow for adjustment.
■
Drill the screw holes using a
3
⁄ 32 " drill bit.
■
Attach the hold-down brackets to the mounting surface using
the screws provided.
■
If necessary, adjust bracket location in the channel by
loosening the screw and sliding the bracket up or down for
best operation.
Hold-Down
Bracket
Bottom
Rail
Outside Mount
Preferred Alternate
Inside Mount
Preferred Alternate
If necessary,
adjust the
bracket in the
channel.