HunterDouglas Sonnette - Install the Shade- Cassette

INSTALLATION — CASSETTE
11
■
If using extension brackets, attach an installation bracket
to the underside of each extension bracket using thespeed
nuts and screws provided.
Install the Shade— Cassette
■
Position the shade
so that the front
faces you.
■
Ensure that each
lever is pushed to
the left side of the
bracket before installing the shade.
■
Slide the headrail into the installation brackets so that the headrail is between
the lever and the bracket, asshown.
■
Firmly push the headrail into each bracket until it clicks and the levers snap to the right
side of the bracket.
IMPORTANT: Push all levers to the right to confirm they are fully locked, then carefully
pull on the headrail at each bracket to ensure it is installedsecurely.
Attach the Dust Cover (Optional for Outside Mounts)
The dust cover is used to protect the top of the headrail from exposure on outside mounted
shades.
■
Cut the dust cover to desired width.
■
Remove the paper backing on one side of the hook and loop
fastener dots.
■
Apply the dots to the installation brackets on each end of the
shades.
Speed Nuts
Screws
Headrail
Installation
Bracket
Lever
Slide the Headrail
Between the Lever
and the Bracket.
Remove
Paper
Backing
Overhead View
No Dust Cover
Dots