3 - 26 Machine Maintenance 704-0212-209 VM Series Maintenance and Safety Manual
Coolant Filter for CTS
Weekly: Check the CTS coolant filter (if equipped) and clean when necessary.
Every 3 Months or 500 hours: Replace the CTS coolant filter (if equipped).
The optional Coolant Thru Spindle (CTS) pump assembly has an internal filter to clean
coolant used by the CTS system. The CTS pump assembly is located at the rear of the
coolant tank.
To access the CTS coolant filter:
1. Remove the filter housing unit from the CTS pump assembly. Remove the CTS
coolant filter from the housing unit.
2. Rinse the filter with clean, soapy water and dry. If the filter is damaged,
replace it.
To Next Page
Loading...
