Husqvarna EE 5 2021 - Removing the Start Number Plate; Installing the Start Number Plate; Removing Front Fender

SERVICE WORK ON THE CHASSIS 13
53
13.14 Removing the start number plate
M01719-10
–
Remove screw
1
.
– Unhook the start number plate from the brake line and
remove it.
13.15 Installing the start number plate
M01720-10
– Attach the start number plate to the brake line.
– Position the start number plate.
Holding lugs
1
engage in the fender.
M01721-10
–
Mount and tighten screw
2
.
Guideline
Screw, start number
plate
M6 4 Nm (3 lbf ft)
13.16 Removing front fender
M01810-10
–
Remove screws
1
. Take off the front fender.