Husqvarna EE 5 2021 - 17 Cooling 17

To Next Page

To Previous Page

COOLING 17

17.1 Cooling

M01734-10

The Powerpack LV

and the electric motor

are air-cooled.

Cooling is effected by the air stream.

The lower the speed, the less the cooling effect. Dirty cooling fins

also reduce the cooling effect.

Main Page

Default Chapter4
- Table of Contents4
1 Means of Representation 17
- Symbols Used7
- Formats Used7
2 Safety Advice8
- Use Definition - Intended Use8
- Misuse8
- Notes/Warnings8
- Grades of Risks8
- Tampering Warning8
- Safe Operation9
- Fall or Accident10
- Protective Clothing10
- Work on Vehicle, Motor, and Rechargeable Lithium-Ion Battery10
- Environment10
- Owner's Manual11
- Fire Hazard11
3 Important Notes12
- Manufacturer Warranty, Implied Warranty12
- Fuel, Auxiliary Substances12
- Spare Parts, Accessories12
- Service12
- Figures12
- Customer Service12
- Power Supply13
- Operation at Low Temperatures13
4 View of Vehicle14
- View of Vehicle, Front Left (Example)14
- View of Vehicle, Rear Right (Example)15
5 Serial Numbers16
- Vehicle Identification Number16
- Type Label16
- Motor Number16
- Fork Part Number16
- Shock Absorber Article Number17
- Battery Identification Number17
6 Controls18
- Hand Brake Lever18
- Throttle Grip18
- On/Off Button18
- Magnetic Switch on Handlebar18
- Magnetic Switch under the Seat19
- Foot Brake Lever19
- Plug-In Stand20
- Diagnostics Connector20
7 Multifunctional Element 721
- Ride Mode Button21
- Ride Mode Display22
- Malfunction Indicator Lamp22
- Charging Level Indicator22
- Power Reduction23
8 Preparing for Use24
- Advice on Preparing for First Use24
9 Riding Instructions26
- Checks and Maintenance Measures When Preparing for Use26
- Starting the Vehicle26
- Starting off27
- Applying the Brakes27
- Recuperation28
- Stop, Park28
- Transporting29
10 Service Schedule30
- Additional Information30
- Required Work30
- Recommended Work31
11 Suspension Setting32
- Checking the Basic Chassis Setting with the Rider's Weight32
- Air Suspension XACT 523532
- Compression Damping of the Shock Absorber33
- Adjusting the Low-Speed Compression Damping of the Shock Absorber33
- Adjusting the High-Speed Compression Damping of the Shock Absorber34
- Adjusting the Rebound Damping of the Shock Absorber34
- Measuring the Dimension of the Rear Wheel Unloaded35
- Checking the Static Sag of the Shock Absorber36
- Checking the Riding Sag of the Shock Absorber36
- Adjusting the Spring Preload of the Shock Absorber37
- Adjusting the Riding Sag38
- Checking the Basic Setting of the Fork38
- Adjusting the Fork Air Pressure39
- Adjusting the Rebound Damping of the Fork40
- Handlebar Position40
- Adjusting the Handlebar Position41
12 Seat Height42
- Seat Height Adjustment Options42
- Adjusting the Seat Height on the Shock Absorber42
- Adjusting the Seat Height on the Fork43
- Adjusting the Seat Height on the Frame44
13 Service Work on the Chassis 1347
- Raising the Motorcycle with a Lift Stand47
- Removing the Motorcycle from the Lift Stand47
- Bleeding the Fork Legs47
- Cleaning the Dust Boots of the Fork Legs48
- Removing the Fork Protector48
- Installing the Fork Protector49
- Removing the Fork Legs49
- Installing the Fork Legs49
- Removing the Lower Triple Clamp50
- Installing the Lower Triple Clamp51
- Checking the Steering Head Bearing Play53
- Adjusting the Steering Head Bearing Play54
- Lubricating the Steering Head Bearing54
- Removing the Start Number Plate55
- Installing the Start Number Plate55
- Removing Front Fender55
- Installing Front Fender56
- Removing the Shock Absorber56
- Installing the Shock Absorber56
- Removing the Seat57
- Mounting the Seat57
- Checking the Chain for Dirt58
- Cleaning the Chain58
- Checking the Chain Tension59
- Adjusting the Chain Tension59
- Checking the Chain, Rear Sprocket, Motor Sprocket, and Chain Guide60
- Adjusting the Chain Guide62
- Checking the Frame62
- Remove Screw62
- Mount and Tighten Screw62
- Guideline62
- Checking the Link Fork63
- Checking the Rubber Grip63
- 14 Brake System64
- Checking Play of Handbrake Lever64
- Adjusting the Play of the Hand Brake Lever64
- Adjusting the Basic Position of the Hand Brake Lever64
- Checking the Brake Discs65
- Checking the Front Brake Fluid Level66
- Remove Screws66
- Adding Front Brake Fluid67
- Checking the Front Brake Linings68
- Changing the Brake Linings of the Front Brake68
- Checking the Free Travel of the Foot Brake Lever71
- Adjusting the Free Travel of the Foot Brake Lever71
- Adjusting the Basic Position of the Foot Brake Lever72
- Checking the Rear Brake Fluid Level73
- Adding Rear Brake Fluid73
- Checking the Brake Linings of the Rear Brake74
- Changing the Rear Brake Linings75
15 Wheels, Tires78
- Removing the Front Wheel78
- Installing the Front Wheel78
- Removing the Rear Wheel79
- Installing the Rear Wheel80
- Checking the Tire Condition81
- Checking Tire Pressure82
- Checking Spoke Tension82
16 Powerpack Lv, Battery Charger84
- Overview of Battery Charger84
- Positioning the Battery Charger84
- Charging the Powerpack LV85
17 Cooling 1789
18 Cleaning, Care90
- Cleaning the Motorcycle90
19 Storage92
- Preparing for Use after Storage92
20 Troubleshooting 2093
21 Technical Data 2195
- Engine95
- Chassis95
- Electrical System96
- Tires96
- Fork96
- Shock Absorber97
- Chassis Tightening Torques97
22 Substances100
23 Auxiliary Substances 23101
24 Standards102
25 Index of Special Terms 25103
26 List of Abbreviations104
27 List of Symbols 27105
- Yellow and Orange Symbols105
- Index106

Husqvarna EE 5 2021 - 17 Cooling 17

Table of Contents

Related product manuals