Huvitz HLM-1 - Page 45

45
HPE-
8000X
HPE-
8000X
HLM-1
⑤ Press ‘MEM’ button to save the measurement. Data will be fixated after saving
the data. Pressing ‘MEM’ button once again will save and fixate modified
measurement.
‘AUTO MSR NORMAL’ function is to save measurement automatically 1 second
after ‘MARKING OK’ display when the function is enabled in User Set Up
screen.
⑥ Press ‘PRINT’ button to print out the measurement.
The drawings below will be displayed on the bottom left corner of the screen
according to presence of a lens.
!
INFORMATION
!
INFORMATION