Pg 8.1 V18
SECTION 8, SPECIFICATIONS
V-18 SPECIFICATIONS LIST
Capacity: Horizontal 18 "
Vertical 20 "
@ 45° Left or Right 13"
Blade 1 1/4" x 14' 11" x .042"
(Optional-Extended Head
Blade Length 16'11")
Blade Speed 65-385 SFM with 39:1 gearbox
Blade Tension Hydraulic
Blade Guides Carbide
Blade Wheel Diameter 19" DIA
Motors 7 1/2 HP Blade Drive
2 HP Hydraulic Drive
Pumps Pressure Compensated
Constant Pressure Variable Flow
6 1/2 GPM Hydraulic Pump
3 1/2 GPM Coolant Pump ( 150W )
Vises Hydraulic full stroke
(2nd hydraulic vise optional)
Head Swing Hydraulically Positioned and
Locked. Full 45° Left or Right
Table Height 38"
Feed System Hydraulic Variable Pressure
0-300 PSI
Independent Feed Rate
0-15 IPM
System Pressure 650 PSI
Tank Capacity Hydraulic 7 US Gallons
Coolant 30 US Gallons
Guide Arm Hydraulically Positioned and Locked
Machine Weight 4500 lbs
Overall Dimensions 97" High @ 90°
80" Wide
120" Long
Shipping Dimensions on tubes 85 1/2" High @ 45° Left
Head locked at 45° left 80" Wide
94" Long
To Next Page
Loading...
