Page 23
Local communication (data entry and readout) is possible with the
Comfort / Comfort Plus Control using the display and the keypad.
The most important types of communication are:
• Readout/Modification of steam bath operational values (in User
Mode)
• Selection of the active language (in Operating Mode)
• Readout of humidifier data (“electronic name plate”; in Operating
Mode)
• Selection/Modification of essential parameters and system func-
tions (in Operating Mode)
Access Options:
In User Mode, some parameters can be temporarily modified (Desired
Temperature Value, Essence Delivery, Steam Bath Exhaust Fan Oper-
ation, Light Operation), also see Section: “Changing Steam Bath
Parameters in User Mode”; all other parameters and system functions
which have a critical impact on the proper operation of the humidifier
are typically protected by an access procedure that requires entry of a
code (P0=010).
To Next Page
Loading...
