Page 32
5.3.4 Parameter Setting Menu
Parameters partly determine the humidifier’s sequence of operations
and processing of signals.
These parameters can be modified as needed.
For security reasons, access to some parameters is protected by an
entry code. Two separate access levels have been defined:
• “Basic customer level” without access code
• “Advanced customer level” with access code “010”
The “Parameter Setting” menu is divided into six submenus:
• Steam bath parameter
• Power parameter
• Data parameter
• Control parameter
• Maintenance parameter
• Blow-Down parameter
Once access to the “Parameter Settings” menu is gained by entering
access code “010,” an expanded set of parameters is available in com-
parison to access without a code entry.
See following pages for a summary table of parameters containing the
information below:
• Parameter designation
• Possible parameter value settings
• Menu/submenu where the parameter is located
• Required access code for the parameter
At the end of the summary table, the parameters are described in
detail; examples of programming sequences for parameter setting are
provided with and without access codes.
Parameter modifications made and confirmed in Operating Mode are
permanent. They remain unchanged even when the unit is deacti-
vated.
To Next Page
Loading...
