Hypertherm POWERMAX 45 User Manual

Maintenance and RepaiR
5-2 powermax 45 Operator Manual
Perform routine maintenance
DANGER
ELECTRIC SHOCK CAN KILL
Disconnect electrical power before performing any maintenance. Allwork requiring
removal of the power supply cover must be performed by a qualified technician.
Every use:
Check the indicator lights and correct any fault
conditions.
Inspect the consumables for proper installation and wear.
Every 3 months:
Replace any damaged labels.
Inspect the trigger for damage. Inspect the torch body for cracks
and exposed wires. Replace any damaged parts.
Inspect the power cord and plug. Replace if
damaged.
Inspect the torch lead. Replace if damaged.
Every 6 months:
or
Clean the inside of the power supply with compressed air or a
vacuum.

Hypertherm POWERMAX 45 Specifications

General

Output Current	45 A
Rated Output	45 A
Cutting Thickness	12 mm
Severance Thickness	19 mm
Cutting Method	Plasma
Gas Supply	Compressed Air or Nitrogen
Torch Lead Length	7.6 m