IBM 5150 - Page 290

CLD = Clear direction S1D = Set direction
1111111001 111 111 1 0
C II
= Clear interrupt
S11 = Set interrupt
1111110101
111111011
HL1= Halt WAI1 = Wait
111101001
10011011
LOCK = Bus lock prefix ESC = Escape (to external device)
11110000\
1 1 0 1 1 x x x I mod x x x rIm
Footnotes:
if d = 1 then "to"; if d = 0 then "from"
if w = 1 then word instruction; if w = 0 then byte instruction
if s:w = 01 then 16 bits of immediate data from the operand
if s:w = 11 then an immediate data byte is sign extended to form the
16·bit operand
ifv =0 then "count" = 1; if v =1 then "count" in (C Ll
x =don't care
~ z is used for some string primitives to compare with ZF FLAG
AL = 8·bit accumulator
AX = 16-bit accumulator
CX = Count register
DS = Data segment
DX = Variable port register
ES = Extra segment
Above/below refers to unsigned value
Greater = more positive;
Less = less positive (more negative) signed values
B-lS