supports enhanced data rate (EDR) copper and optical cables when connecting to EDR 100 Gb or HDR
200 Gb InniBand switches. See “Cable matrix” on page 130 for more details.
Note: The Virtual Protocol Interconnect (VPI) feature is not supported on this adapter. The adapter must
be used only as an InniBand adapter.
Figure 40. 2-port HDR 100 Gb InniBand ConnectX-6 adapter (FC EC6G)
Specications
Item
Description
Adapter FRU number
02CM912 (Designed to comply with RoHS requirement)
I/O bus architecture
PCIe4 x16
Managing PCIe adapters
129
To Next Page
Loading...
