Table 2-1 (Page 23 of 25). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps
Action/FRU
1801 - PCI Error (ROM not
available).
A PCI adapter card has requested memory
resources that are not available.
1. Choose ISA Legacy Resources from
the Setup Utility main menu, and make
sure the memory resources settings for
ISA legacy adapter cards are correct.
If the memory resources settings are
not correct, change the settings.
2. If all memory resources are being used
by ISA legacy adapter cards, you might
need to remove an ISA card to make
memory available to the PCI adapter
card.
1802 - PCI Error (I/O address
not available).
A PCI adapter card has requested an I/O
address that is not available, or the PCI
adapter card might be defective.
Choose ISA Legacy Resources from the
Setup Utility main menu, and make sure the
I/O port resources settings for ISA legacy
adapter cards are correct. If the I/O port
resources settings are not correct, change
the settings.
If the I/O port resources settings are
correct, the PCI adapter card might be
defective.
1803 - PCI Error (memory above
1 MB not available).
A PCI adapter card has requested a
memory address that is not available, or the
PCI adapter card might be defective.
Choose ISA Legacy Resources from the
Setup Utility main menu, and make sure the
memory resources settings for ISA legacy
adapter cards are correct. If the memory
resources settings are not correct, change
them.
If the memory resources settings are
correct, the PCI adapter card might be
defective.
2-32
To Next Page
Loading...
Need help?
General