IBM Aptiva 2144 - Page 242

P54C-150MHz processor 1-8
P54C-166MHz processor 1-8
P54C-75MHz processor 1-8
parallel port connector 5-22
parallel, interface 1-11
part numbers, software FRUs 7-21
parts catalog 7-1
CD-ROM drive 7-13
diskette drive 7-11
hard disk drive 7-11
keyboard 7-19
machine type 2144. exterior 7-3
machine type 2154 interior 7-4
Machine Type 2168 exterior 7-7
Machine Type 2168 interior 7-8
monitor 7-16
mouse 7-19
power cord (linecord) 7-16
software 7-21
sound adapter card 7-13
parts/test point locations 5-1
plug and play adapter cards 1-22
plug and play screen 1-22
positionnement du sélecteur de
tension viii
POST 1-3, 3-2
POST error codes 2-3
POST error history 1-26, 2-62
printing 2-62
viewing 2-62
power check 2-26
power connector 5-24
power supply 1-9
power supply specifications 5-8
power supply, removing 4-11, 4-32
power-on password, reset
Type I-1 system board 1-14
power-on self test 3-2
primary hard disk drive connector
(IDE) 5-11
processor (type I-1) upgrade 4-19
processor (type I-2) upgrade 4-20
processor jumper settings—speed I-2
type I-2 processor jumpers 5-7
processor jumper settings—type I-1
type I-1 processor jumpers 5-4
processor speed settings—type I-1 5-4
processor upgrade, removing 4-37
processors
Cyrix 5x86C-100MHz 1-8
Cyrix/IMD 486DX4-100MHz 1-8
P54C-100MHz 1-8
P54C-120MHz 1-8
P54C-133MHz 1-8
P54C-150MHz 1-8
P54C-166MHz 1-8
P54C-75MHz 1-8
product description 1-6
R
RAM 1-27
rapid resume manager 1-24
read verify 3-6
recovery software installation 4-42
recovery software packages,
descriptions 7-21
refresh rates and monitor frequencies,
type I-2. 1-13
removing parts
machine type 2168 4-25
3.5-in. bays 4-26
5.25-in. bays 4-28
adapter cards 4-31
battery 4-38
cache 4-35
cover 4-25
hard disk drive 4-29
LED and cable 4-39
power supply 4-32
processor 4-37
riser card 4-33
SIMMs 4-34
system board 4-40
upgrade processor 4-37
video memory 4-36
machine type 54 4-2
3.5-in. bays 4-6
5.25-in. bays 4-7
adapter cards 4-10
X-4