Power Supplies (with Rapid Resume Features)
The power supply is a 145-W switchable high/low voltage power supply
with a variable fan speed and a connector for a detachable grounded
3-wire power cord. The power cable has four DASD connectors: one
mini power connector and three standard 4-pin connectors. The power
supply also has a non-switched appliance outlet connector.
For some countries outside the United States, the power supply might
have five standard 4-pin connectors and one mini power connector, for
a total of six DASD connectors.
To support the Rapid Resume feature, all power supplies have a 3-wire
auxiliary control cable that connects on the system board. There is no
on/off switch cable assembly for the power supplies.
Cables
All models contain one cable for hard disk drives and one cable for
diskette drives. A momentary power switch and cable assembly that
connects to the system board, a Wake Up on Ring modem cable, and a
voice modem cable are also included.
Diskette Drive—AT-type
All models contain a 3.5-in. 1.44MB Slimline diskette drive.
Multimedia Models
Multimedia models feature the following components.
5.25-in. high-performance, quad-speed (4X), quad-speed (4X)
changer, or six-speed (6X) CD-ROM IDE/AT drive that can read
data and play audio from standard and mini CD-ROM and audio
compact discs (audio CDs). It is compatible with industry-standard
multimedia requirements.
An audio cable (MM3 or MM4).
Sound adapter card (MM3, MM4, or MM5) that is compatible with
and runs many of the latest software applications designed for
multimedia computers.
MWave card with fax send/receive, telephone answering,
speakerphone, wavetable audio, voice-over-data, and 3D sound
features.
A CD-ROM drive system interface cable.
One pair of external speakers (MM3, MM4, or MM5).
Speaker power supply.
Microphone.
Joystick (on some models).
General Information 1-9
To Next Page
Loading...
Need help?
General