a. On an AS/400 command line, type:
DSPHDWRSC *AHW
Press the Enter key.
b. When the Display All Hardware Resources display appears, type 7 in
the Opt column next to the feature number for the device you just
installed.
Press the Enter Key.
If the system does not list the tape unit, ensure that you have properly
installed the tape unit.
c. If you have a printer, print the configuration list. Place the
configuration list in Basic System Operation, Administration, and Problem
Handling, SC41-5206-04.
Note: To print the hardware resources list, press F6 twice.
d. Return to the AS/400 Main menu by pressing F3.
__ 28. For information on how to make your removable media device operational,
go to the AS/400 Information Center.
The installation of the removable media device is complete.
64 Setting Up Your 5065 or 5066 Expansion Unit V4R5
To Next Page
Loading...
Need help?
General