IBM eserver pSeries 7311 D10 User Manual

2. Use the following procedure to determine if you are installing a long adapter or a
short adapter. If you know the length of your adapter, skip the following steps and
proceed to 3 on page 89.
a. Remove the adapter from its protective packaging and, if present, remove the
plastic extension handle from the end of the adapter.
b. Place the adapter or a blank filler over the cassette with the upper left corner
aligned into the top adapter retaining clip.
Handle
Bottom of
Tailstock
Cassette Linkage Assembly
Adapter
Top Adapter-Retaining Clip
88 Eserver pSeries 7311 Model D10 and Model D20 Service Guide

IBM eserver pSeries 7311 D10 Specifications

General

Brand	IBM
Model	eserver pSeries 7311 D10
Category	Server
Language	English