Output parameters to the device
Sector Count
Time-out Parameter. If it is zero, the automatic power down sequence is
disabled. If it is non-zero, then the automatic power down sequence is enabled.
The time-out interval is shown below:
21 minutes 15 seconds255
21 minutes 10 seconds254
8 hours253
21 minutes252
(Value-240) * 30 minutes241-251
Value * 5 seconds1-240
Timer disabled0
-------------------------------
Time-outValue
When the automatic power down sequence is enabled, the drive will enter Standby mode automatically if
the time-out interval expires with no drive access from the host. The time-out interval will be reinitialized if
there is a drive access before the time-out interval expires.
Deskstar 60 GXP Hard disk drive specification
119
To Next Page
Loading...
