15.23 Security Freeze Lock (F5h)
see below
Status
1 1 1 1 0 1 0 1
Command
- - - - - - - -
Device/Head
1 - 1 D - - - -
Device/Head
- - - - - - - -
Cylinder High
- - - - - - - -
Cylinder High
- - - - - - - -
Cylinder Low
- - - - - - - -
Cylinder Low
- - - - - - - -
Sector Number
- - - - - - - -
Sector Number
- - - - - - - -
Sector Count
- - - - - - - -
Sector Count
see below
Error
- - - - - - - -
Feature
- - - - - - - -
Data
- - - - - - - -
Data
7 6 5 4 3 2 1 0
Register
7 6 5 4 3 2 1 0
Register
Command Block Input
Registers
Command Block Output
Registers
V–0––0V000V00000
ERRIDXCORDRQDSCDFRDYBSYAMNT0NABT0IDN0UNCCRC
0123456701234567
Status RegisterError Register
Figure 103. Security Freeze Lock Command (F5h)
The Security Freeze Lock Command allows the device to enter frozen mode immediately.
After this command is completed, the command which updates Security Mode Feature (Device Lock
Function) is rejected.
Frozen mode is quit only by Power off.
The following commands are rejected when the device is in frozen mode. For details refer to Figure 73 on
page 87.
y
Security Set Password
y
Security Unlock
y
Security Disable Password
y
Security Erase Unit
Deskstar 60 GXP Hard disk drive specification
142