15.32.13.4 Attribute Threshold
These values are preset at the factory and are not intended to be changeable.
15.32.13.5 Data Structure Checksum
The Data Structure Checksum is the two's compliment of the result of a simple 8-bit addition of the first
511 bytes in the data structure.
15.32.14 S.M.A.R.T. error log sector
The following figure defines the 512 bytes that make up the S.M.A.R.T. error log sector. All multibyte
fields shown in these data structures are in byte ordering.
512
1FFh1Data structure checksum
1C6h57Reserved
1C4h2Device error count
16Ah905th error log data structure
110h904th error log data structure
B6h903rd error log data structure
5Ch902nd error log data structure
02h901st error log data structure
01h1Error log pointer
00h1S.M.A.R.T. error log version
OffsetByteDescription
Figure 127. SMART error log sector
15.32.14.1 S.M.A.R.T. error log version
This value is set to 01h.
15.32.14.2 Error log pointer
This points to the most recent error log data structure. Only values 1 through 5 are valid.
15.32.14.3 Device error count
This field contains the total number of errors. The value will not roll over.
Deskstar 60 GXP Hard disk drive specification
170
To Next Page
Loading...
