9514.1 PIO Data In commands
.......................................................
95
14.0 Command Protocol
.........................................................
9413.17.3 Exceptions in Address Offset Mode
.........................................
9413.17.2 Identify Device Data
....................................................
9313.17.1 Enable/Disable Address Offset Mode
........................................
9313.17 Address Offset Feature
.......................................................
9313.16 Automatic Acoustic Management feature set (AAM)
.................................
9213.15
Advanced Power Management feature set (APM)
...................................
9213.14
Power-Up In Standby feature set
...............................................
9213.13.3 Recovered read errors
...................................................
9113.13.2 Nonrecovered read errors
................................................
9113.13.1 Nonrecovered write errors
................................................
9113.13 Auto Reassign Function
......................................................
9113.12 Reassign Function
..........................................................
9113.11 Write cache function
.........................................................
9013.10 Seek Overlap
..............................................................
8913.9.2
Security extensions
......................................................
8813.9.1 Example for operation (in LBA mode)
........................................
8813.9 Host Protected Area Function
..................................................
8713.8.5 Command table
.........................................................
8313.8.4 Operation example
......................................................
8313.8.3 Passwords
.............................................................
8313.8.2 Security level
...........................................................
8313.8.1 Security mode
..........................................................
8213.8 Security Mode Feature Set
....................................................
8213.7.8
Self-test
...............................................................
8213.7.7 Error log
..............................................................
8213.7.6
Off-line read scanning
....................................................
8213.7.5 S.M.A.R.T. commands
...................................................
8213.7.4 Threshold Exceeded Condition
.............................................
8113.7.3 Attribute thresholds
......................................................
8113.7.2 Attribute values
.........................................................
8113.7.1 Attributes
..............................................................
8113.7 S.M.A.R.T. function
.........................................................
8113.6.4 Interface capability for power modes
.........................................
8013.6.3 Standby timer
..........................................................
8013.6.2 Power management commands
............................................
8013.6.1 Power modes
..........................................................
8013.6 Power management feature
...................................................
7913.5 Overlapped and queued feature
................................................
7813.4.2 LBA Addressing Mode
....................................................
7813.4.1 Logical CHS Addressing Mode
.............................................
7813.4 Sector Addressing Mode
......................................................
7713.3 Diagnostic and Reset considerations
............................................
7613.2 Register initialization
.........................................................
7513.1 Reset response
............................................................
75
13.0 General operation
..........................................................
7212.13 Status Register
.............................................................
7112.12 Sector Number Register
......................................................
7112.11 Sector Count Register
........................................................
7112.10 Features Register
...........................................................
7012.9 Error Register
..............................................................
7012.8 Device/Head Register
........................................................
6912.7 Drive Address Register
.......................................................
Deskstar 60 GXP Hard disk drive specification
v