Table 7. Service Processor Error Codes (continued)
Error Code Description Action/
Possible Failing FRU
4066 00B3 Scan interface basic assurance tests
detected clock fault
1. Clock card
Location: U1.1-P1.1.1
2. CEC RIO bus adapter
Location: U1.1-P1.1
4066 00B7 Scan interface basic assurance tests
detected insufficient hardware resources to
continue IPL
This error code appears after the initial
testing by the service processor firmware on
the CEC was completed correctly, but a
problem occurred when the firmware tried to
communicate outside the CEC. Suspect a
problem with the RIO interface, either cables
or adapters.
4066 0200 Scan interface basic assurance tests
detected memory riser card fault
Memory riser card 1
Location: U1.1-P1-M1
4066 0201 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 1, riser 1
Location: U1.1-P1-M1.1
4066 0202 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 2, riser 1
Location: U1.1-P1-M1.2
4066 0203 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 9, riser 1
Location: U1.1-P1-M1.9
4066 0204 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 10, riser 1
Location: U1.1-P1-M1.10
4066 0205 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 17, riser 1
Location: U1.1-P1-M1.17
4066 0206 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 18, riser 1
Location: U1.1-P1-M1.18
4066 0207 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 25, riser 1
Location: U1.1-P1-M1.25
4066 0208 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 26, riser 1
Location: U1.1-P1-M1.26
4066 020D Scan interface basic assurance tests
detected memory DIMM group fault
Memory octal A, riser 1
Location: U1.1-P1-M1.1 x8
4066 020E Scan interface basic assurance tests
detected memory DIMM group fault
Memory quad A odd, riser 1
Locations: U1.1-P1-M1.1 x4
4066 020F Scan interface basic assurance tests
detected memory DIMM group fault
Memory quad A even, riser 1
Locations: U1.1-P1-M1.2 x4
4066 0211 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 3, riser 1
Location: U1.1-P1-M1.3
4066 0212 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 4, riser 1
Location: U1.1-P1-M1.4
4066 0213 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 11, riser 1
Location: U1.1-P1-M1.11
4066 0214 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 12, riser 1
Location: U1.1-P1-M1.12
4066 0215 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 19, riser 1
Location: U1.1-P1-M1.19
4066 0216 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM 20, riser 1
Location: U1.1-P1-M1.20
210 Service Guide
To Next Page
Loading...
Need help?
General