Table 9. Common Firmware Error Codes (continued)
Error Code Description Action/
Possible Failing FRU
B10F 1008 Service processor failure Primary I/O drawer backplane
Location: U0.1-P1
B10F 100E Service processor boot flash corrupted Primary I/O drawer backplane
Location: U0.1-P1
B10F 100F Service processor base flash corrupted Primary I/O drawer backplane
Location: U0.1-P1
B10F 1300 Service processor failure Primary I/O drawer backplane
Location: U0.1-P1
B10F 1370 Service processor flash update failure 1. Retry flash update
2. Primary I/O drawer backplane
Location: U0.1-P1
B10F 1380 Service processor program failure 1. Update system firmware
2. Primary I/O drawer backplane
Location: U0.1-P1
B10F 1381 Service processor flash error
1. Update system firmware
2. Primary I/O drawer backplane
Location: U0.1-P1
B10F 1384 Service processor failure Primary I/O drawer backplane
Location: U0.1-P1
B10F 1387 Service processor failure Primary I/O drawer backplane
Location: U0.1-P1
B10F 1400 Service processor failure Primary I/O drawer backplane
Location: U0.1-P1
B10F 1401 Service processor failure Primary I/O drawer backplane
Location: U0.1-P1
B10F 1670 Service processor flash update failure 1. Retry flash update
2. Primary I/O drawer backplane
Location: U0.1-P1
B10F 1672 Service processor firmware update invalid Call second level of support
B10F 1675 Service processor memory failure Primary I/O drawer backplane
Location: U0.1-P1
B10F 1681 Service processor firmware update invalid Call second level of support
B10F 1682 Service processor firmware update invalid Call second level of support
B10F 1683 Service processor firmware update invalid Call second level of support
B1FD 0013 A firmware update has failed because the
update image is invalid. The update was
aborted before any changes were made to
the currently installed firmware.
Reset the service processor (by activating the
pinhole reset switch or by disconnecting, then
reconnecting power).
Then install a valid firmware update image for
the specific system type and model.
B1FD 0015 Too many firmware update diskettes inserted
(or wrong faulty update image).
1. Assure the firmware update image is
correct for the specific system type and
model.
2. Replace the update diskettes with a new
set of firmware diskettes.
Chapter 5. Error Code to FRU Index 339