IBM Storwize V7000 Maintenance Guide

Description
This command resets the service assistant password to the default value passw0rd.
If the node canister is active in a system, the superuser password for the system is
reset; otherwise, the superuser password is reset on the node canister.
If the node canister becomes active in a system, the superuser password is reset to
that of the system. You can configure the system to disable resetting the superuser
password. If you disable that function, this action fails.
This command calls the satask resetpassword command.
Snap command
Use this command to collect diagnostic information from the node canister and to
write the output to a USB key.
Syntax
 satask snap -options 
Parameters
-options
(Optional) Specifies which diagnostic information to collect.
Description
This command moves a snap file to a USB key.
This command calls the satask snap command.
Apply software command
Use this command to install a specific software package on the node canister.
Syntax
 satask installsoftware -file filename
-ignore

Parameters
-file
(Required) The file name of software installation package.
-ignore
(Optional) Overrides prerequisite checking and forces installation of the
software.
Description
This command copies the file from the USB key to the upgrade directory on the
node canister.
This command calls the satask installsoftware command.
Chapter 5. Storwize V7000 user interfaces for servicing your system 37

IBM Storwize V7000 Specifications

General

Brand	IBM
Model	Storwize V7000
Category	Storage
Language	English