IBM SUREMARK TF6 - Select Horizontal Size of Bar Code; Select Bar Code Height; Select Printing Position of Human Readable Information (HRI); Print Bar Code Examples

Print bar code examples
Table 22. Print bar code examples
Command n = Data
UPC-A X'1D 68' X'00' X'30 33 31 33 32 33
31 32 30 37 38'
UPC-E X'1D 68' X'01' X'34 39 30 36 39 30
00'
JAN 13 (EAN-130 X'1D 68' X'02' X'34 39 31 32 33 34
35 36 37 38 39 30
00'
JAN8 (EAN-8) X'1D 68' X'03' 34 39 31 32 33 34 35
36 00
CODE 39 X'1D 68' X'04' 30 31 32 33 34 35 36
37 00
ITF X'1D 68' X'05' 31 32 33 34 35 36 37
38 39 30 31 32 00
CODABAR X'1D 68' X'06' 42 39 30 2E 2B 3A
2F 24 2D 43 00
CODE 128C X'1D 68' X'07' 35 34 35 35 35 36 35
37 35 38 35 39 00
CODE 93 X'1D 68' X'08' 31 32 33 34 35 36 00
Reserved X'1D 68' X'0A - FF'
Select horizontal size of bar code
EIA-232 Syntax:
GS w n or X'1D77;n'
where:
n The horizontal magnification of the line width in the bar code, (2 ≤ n
≤ 4).
Default:
n=03
Note: The last valid value is kept when an invalid value is sent.
Select bar code height
EIA-232 Syntax:
GS h n or X'1D68;n'
where:
n The dot height of the bar code, (1 ≤ n ≤ 255).
Default:
n = X'A2' (162 decimal)
Select printing position of human readable information (HRI)
EIA-232 Syntax:
GS H n or X'1D48;n'
where:
Updated April 2, 2009
152 SureMark Printers User’s Guide