4
Click on Advanced Properties.
5
Click on Monitor.
6
Make sure that Automatically Detect Plug and Play
Monitors is checked.
7
If the option is checked and your monitor is still not
recognized after you restart the computer, click on the
Change button.
8
Select the monitor type that you have attached and
then click on OK.
9
Click on Close.
10
If you are prompted to restart your computer, click on
OK.
How do I maximize battery life?
To maximize battery life, do the following:
Use the battery until the charge is completely depleted
(until the battery and power LEDs flash in unison).
Recharge the battery completely before using (the
battery is fully charged when the AC Adapter is plugged
in and the battery LED is green).
For a new battery or a battery that you have not used
recently:
1.
Use the battery until the charge is completely
depleted (until the battery and power LEDs flash in
unison).
2.
Recharge completely before using (the battery is
fully charged when the AC Adapter is plugged in
and the battery LED is green).
3.
Repeat these steps three times.
Always use power management features such as
Advanced Power Management (APM), power modes,
standby, suspend, and hibernation. See the Chapter 4,
Using Your Computer with a Battery Pack, for more
detailed information about power management features.
Chapter 7. Solving Computer Problems 97
To Next Page
Loading...
Need help?
General
