IBM ThinkPad 600 User Manual

Using the Battery Pack
This section describes how to charge your battery pack and display
its status.
Charging the Battery Pack
You can charge the battery pack when the AC Adapter is connected
to the computer and the battery pack is installed. You need to
charge the battery pack in any of the following conditions:
When you purchase a new battery pack
If the battery status indicator starts blinking
If the battery pack has not been used for a long time
Notes
Before you charge the battery pack, ensure that its
temperature is at least 10°C (50°F).
If the battery pack has not been used for a long time, it will
not be fully charged with only a single charging. You will
have to completely discharge it; then recharge it three to six
times to maximize battery operating time.
Monitoring the Battery Status
You can monitor the battery status through the battery status
indicator and the Fuel-Gauge program.
20 IBM ThinkPad 600 Online Book

IBM ThinkPad 600 Specifications

General

Brand	IBM
Model	ThinkPad 600
Category	Laptop
Language	English