IBM ThinkPad 600 User Manual

Note
The current resource information is set as the default and
appears in the input field of each item. The number that
can be set is displayed in the pull-down list box.
4 You can change the following registered information for the PC
Card. The items that can be changed differ depending on the
PC Card.
Card ID
I/O port address
IRQ level
COM number of the serial port
Memory window address
Memory window size
Card offset address
5 Click on the OK button, and save the changes.
To cancel the changes, click on the Cancel button.
Updating the CONFIG.SYS File
For PC Card Director to work correctly, the PC Card device drivers
must be registered in the CONFIG.SYS file. These drivers are
automatically registered in the CONFIG.SYS file when you install PC
Card Director following the instructions in Chapter 8, Installing
Software.
The following section describes the standard rules for each driver
registered in the CONFIG.SYS file for your reference.
Registered Drivers and Standard Rules
The following is a sample of a CONFIG.SYS file:
66
IBM ThinkPad 600 Online Book

IBM ThinkPad 600 Specifications

General

Processor	Intel Pentium II
Graphics	Neomagic MagicGraph128XD
Operating System	Windows 95, Windows 98, or Windows NT 4.0
Resolution	800 x 600
Battery	Lithium-Ion
Optical Drive	Optional external CD-ROM drive
Ports	Serial, Parallel, VGA
Network	10/100 Ethernet
Clock Speed	233 MHz to 300 MHz
Display	12.1-inch TFT