IBM ThinkPad 600 User Manual

Installing PC Card Support Software for DOS
Notes
If you are going to use a docking station with your computer,
you need to uninstall CardSoft for DOS first, and then
reinstall it.
If you are going to use CardWizard for Windows 3.11, do not
install CardSoft for DOS.
To install the PC Card support software for DOS:
1 Insert the CardSoft for DOS Diskette into the diskette drive.
2 At the DOS command prompt, type A:\INSTALL and press
Enter.
The installation window appears.
3 Follow the instructions on the screen.
During installation, use the Arrow keys (↓ or ↑ ) to highlight
your selection; then press Enter.
4 After the installation is complete, remove any diskette from the
diskette drive and restart the computer.
Installing the Audio Device Driver for DOS
To install the audio device driver:
1 Start DOS.
2 Insert the Audio Features Diskette for DOS into the diskette
drive.
3 Type A:\INSTALL and press Enter.
Installing the CD-ROM Device Driver for DOS
To install the CD-ROM device driver for DOS:
1 Start DOS.
2 Insert the CD-ROM Driver Diskette into the diskette drive; then
type A:\UINSTALL and press Enter.
178
IBM ThinkPad 600 Online Book

IBM ThinkPad 600 Specifications

General

Processor	Intel Pentium II
Graphics	Neomagic MagicGraph128XD
Operating System	Windows 95, Windows 98, or Windows NT 4.0
Resolution	800 x 600
Battery	Lithium-Ion
Optical Drive	Optional external CD-ROM drive
Ports	Serial, Parallel, VGA
Network	10/100 Ethernet
Clock Speed	233 MHz to 300 MHz
Display	12.1-inch TFT