3
Select Install IBM ThinkPad CD-ROM Driver for
DOS/Windows in the “Installation Options” window; then follow
the instructions on the screen.
4
After the installation is complete, remove any diskette from the
diskette drive and restart the computer.
Hints and Tips
For details about software parameters related to the DOS
CD-ROM device driver in the CONFIG.SYS file, go to Software
Parameters in CONFIG.SYS.
Software Parameters in CONFIG.SYS
When the CD-ROM device driver is installed in your computer, the
installation program (UINSTALL.EXE) automatically modifies the
CONFIG.SYS file and AUTOEXEC.BAT file. The following are the
parameters for the CD-ROM device driver for CONFIG.SYS:
DEVICE=[drive:][path]IBMTPCD.SYS /R [/C] [/S]
The CD-ROM device driver is IBMTPCD.SYS. Make sure this line is
inserted after the EMM386 statement.
[/C] Sets the cache size in the XMS memory. If this parameter is
specified, the cache size in the XMS memory is 512 sectors. If it is
not specified, the default is 0.
[/S] Sets the power-saving mode to OFF. If you are using DOS with
another operating system (for example, with OS/2 in dual boot), set
the power-saving mode to OFF using this parameter.
Chapter 8. Installing Software 179
To Next Page
Loading...
Need help?
General
